Sahal Facility Management
Riyadh · Jeddah · Khobar

Reliable operations, clear accountability

We provide facility management, operations and maintenance services for commercial and residential properties, with well-planned operating programmes, regular technical follow-up and clear responsibilities from the start of the contract, keeping your facilities ready and supporting business continuity

01Planned maintenancePeriodic maintenance programmes that reflect the condition and use of each system, reducing unexpected breakdowns
02Clear commitmentsA defined scope of work, agreed service levels and known responsibilities for each party
03Documented follow-upPeriodic reports on the condition of systems, the work completed and the issues that need attention

Licences & certifications

We operate under valid licences and recognised certifications

شعار فال
شعار وزارة البلديات والإسكان

ISO

9001

ISO

45001

ISO

14001

فريق فني من سهل لإدارة المرافق في بهو مبنى تجاري
٠١ — رؤيتنا

Good management today, lasting value over time

A facility's value does not end with its design or construction cost. The way it is operated and maintained affects the life of its equipment, the cost of running it and the experience of the people who use it. We therefore treat facility management as an ongoing responsibility built on technical knowledge, planning and regular follow-up, working with owners and facility managers to protect their assets and provide clear information that supports decisions

٠٢ — الخدمات

Integrated services under one management

٠٣ — المبنى

Many systems, one accountable management

Modern facilities depend on interconnected technical systems that need continuous monitoring and close coordination between operation and maintenance. We organise this work and keep each system ready in line with the requirements of your facility

مقطع رأسي · A–Aمخطط توضيحي — غير مقيسالسطحالدور ٤الدور ٣الدور ٢الدور ١الأرضيالقبو

Illustrative diagram; systems and their locations vary from one facility to another

Diagram key
Each point on the diagram is a system we monitor

Explore the systems to see why each one matters to operations and the maintenance and follow-up work it involves, or choose a discipline above

Roof
Central cooling systems (Chillers)

The main source of cooling in large facilities, where any fault directly affects occupant comfort on every floor

Inspection and maintenance
  • Refrigerant pressures and entering and leaving water temperatures
  • Condition of compressors, condensers and fans
  • Chilled-water pumps and cooling towers, where present
In the visit report

Documented operating readings, with observations and recommendations ranked by priority

Roof
Air handling units (AHU)

They control indoor air quality and how efficiently air is distributed across the floors, with a direct effect on comfort and energy use

Inspection and maintenance
  • Filter condition and level of blockage
  • Cooling coils and drain pans
  • Belts, bearings and fan performance
In the visit report

Filter condition and replacement dates, and any issues that need action before they become faults

Façades and floors
VRF systems and split units

The most widely used systems in offices and mid-sized facilities; regular maintenance keeps them efficient and extends their operating life

Inspection and maintenance
  • Outdoor units and condenser cleanliness
  • Indoor units, filters and condensate drain lines
  • Fault codes and control settings
In the visit report

A record of every unit by number, location and condition at each visit

Floors
Terminal units and ductwork

The part of the system occupants feel directly, and where uneven cooling between offices and zones often begins

Inspection and maintenance
  • Fan coil units (FCUs) and their valves
  • Airflow balance between zones
  • Ductwork insulation and leakage
In the visit report

Floor-by-floor observations, with occupant complaints traced to their technical causes

Basement and car parks
Ventilation and extract systems

Keep air clean and safe in car parks, washrooms and kitchens and prevent the build-up of odours and gases

Inspection and maintenance
  • Supply and extract fans and their performance
  • Sensors and automatic controls
  • Cleanliness of outlets and extract grilles
In the visit report

The condition and operational readiness of every fan

Basement
Electrical distribution boards

The main and sub-distribution boards that supply the facility with power; periodic inspection reduces sudden failures and fire risk

أعمال الفحص والصيانة
  • القواطع ونقاط التوصيل وإحكام ربطها
  • قراءات الأحمال وتوازن الأطوار
  • التأريض ونظافة اللوحات وتهويتها
في تقرير الزيارة

قراءات الأحمال وحالة كل لوحة مع الملاحظات مرتبة حسب أولويتها

Site exterior
Standby generators

The backup power source when the mains supply fails, with readiness tested periodically before it is needed

أعمال الفحص والصيانة
  • التشغيل التجريبي الدوري وسرعة الاستجابة
  • مستويات الوقود والزيت وسائل التبريد
  • البطاريات ولوحة التحويل الآلي (ATS)
في تقرير الزيارة

نتائج التشغيل التجريبي وساعات التشغيل وما يلزم قبل الاختبار التالي

Roof and ground tank
Water tanks and pumps

Ensure water of suitable quality is available and pumped reliably to every floor

أعمال الفحص والصيانة
  • نظافة الخزانات وإحكام أغطيتها
  • أداء المضخات وضغط الشبكة
  • العوامات والصمامات ولوحات التحكم
في تقرير الزيارة

حالة كل خزان ومضخة ومواعيد التنظيف والتعقيم القادمة

Floors and basement
Drainage networks

Vertical stacks, horizontal runs and inspection chambers; regular monitoring prevents blockages and leaks before they appear

أعمال الفحص والصيانة
  • غرف التفتيش ومستوى الترسبات
  • مضخات الصرف وغرف التجميع حيث وُجدت
  • مؤشرات التسريب والروائح في الأدوار
في تقرير الزيارة

المواقع التي تحتاج إلى تنظيف أو إصلاح مرتبة حسب أولويتها

Basement
Fire pumps

The core of the firefighting system, which must remain ready at all times and is therefore subject to documented periodic run tests

أعمال الفحص والصيانة
  • تشغيل المضخة الرئيسية والاحتياطية ومضخة الضغط (Jockey)
  • ضغط الشبكة ووضع الصمامات
  • لوحات التحكم وجاهزية التشغيل الآلي
في تقرير الزيارة

نتائج الاختبار الدوري وقراءات الضغط موثقة في سجل الفحص

All floors
Sprinklers and alarm systems

The sprinkler network, alarm panels and detectors that identify fire early and limit its spread

أعمال الفحص والصيانة
  • رؤوس الرشاشات وصمامات التحكم في كل دور
  • لوحة الإنذار والكواشف ونقاط الإنذار اليدوي
  • الأعطال والتنبيهات المسجلة في اللوحة
في تقرير الزيارة

حالة كل منطقة في سجل فحص واحد مع ما يلزم إصلاحه

Shaft and machine room
Lifts

We oversee lift maintenance contracts, lift performance and operational safety under a single point of accountability

أعمال الفحص والصيانة
  • زيارات مقاول المصاعد والتزامه بجدول الصيانة
  • الأعطال المتكررة ومدة توقف كل مصعد
  • شهادات الفحص الدوري ومواعيد تجديدها
في تقرير الزيارة

ملخص أداء المصاعد وأعطالها وما يستدعي المتابعة مع المقاول

Control room
Building management system (BMS)

Allows all systems to be monitored from a single screen and operation to be adjusted to the facility's actual occupancy

أعمال الفحص والصيانة
  • الإنذارات النشطة والمتكررة
  • جداول التشغيل ونقاط الضبط
  • الحساسات والنقاط غير المتصلة
في تقرير الزيارة

الإنذارات وأسبابها وفرص ضبط التشغيل لخفض الاستهلاك

Basement
Energy meters and asset registers

Metering of consumption, with each asset linked to its history and operating cost to support maintenance and replacement decisions

أعمال الفحص والصيانة
  • قراءات العدادات الرئيسية والفرعية
  • أنماط الاستهلاك مقارنة بالفترات السابقة
  • سجل الأصول وحالة كل أصل وعمره التشغيلي
في تقرير الزيارة

مؤشرات الاستهلاك وتحديثات سجل الأصول مع التوصيات

٠٤ — إطار العمل

From first assessment to ongoing follow-up

We start by understanding the condition and needs of your facility, then prepare a clear operation and maintenance plan and follow its delivery, using structured procedures that link assessment, planning, delivery and documentation so that work, responsibilities and results remain clear

Preventive maintenance visit reportSample facility · Illustrative example
نموذج توضيحي
Refrigerant pressure check✓ Completed
AHU filter cleaning✓ Completed
Energy consumption reading✓ Recorded
Valve on floor 3 requires replacement■ Pending approval
المحاور الأربعة
RReliabilityReadiness of critical systems and fewer unplanned failures
CComplianceCompliance with the requirements of the General Directorate of Civil Defense, the Saudi Building Code and safety regulations
EEfficiencyCondition-based maintenance and optimised consumption that lowers operating costs
TTransparencyDocumented reports, clear performance indicators and periodic review with management
مراحل التنفيذ
1Technical assessmentA review of the facility's condition, a survey of its systems and assets, and identification of needs and operational issues
2Operating planPreparing the work programme and defining the scope of services, delivery responsibilities and response levels
3Delivery and follow-upMaintenance carried out by qualified teams under a permit-to-work system, with technicians and contractors supervised against the approved plan
4Reporting and reviewDocumenting work, reviewing results and performance indicators with management, and setting priorities and recommendations
٠٥ — الحوكمة والامتثال

Clear commitments at every stage

Effective facility management depends on clear responsibilities, adherence to safety requirements and a regular process for following up work and measuring performance

Service level agreementsResponse and completion times for each category of service request are defined in the contract, then measured and reviewed periodically so that service levels remain clear and trackable
Operational risk managementA risk assessment before every technical intervention, a permit-to-work system for high-risk tasks and emergency response plans that protect the facility and its users
Regulatory complianceCompliance with the requirements of the General Directorate of Civil Defense and the Saudi Building Code across every system we manage
Occupational health and safetyCertified protective equipment, regular staff training and documentation of every observation or incident and how it was resolved
Management reviewRegular review meetings with facility management covering performance indicators, recommendations and the projected operating budget
٠٦ — الاستدامة والتحول الرقمي

Operational efficiency that lasts

Energy efficiencyMonitoring energy consumption across technical systems and identifying opportunities to reduce it, in line with the Kingdom’s energy-efficiency and sustainability targets
Digital operationsDigital records of every asset, request and visit, feeding periodic reports and maintenance and replacement decisions
National talentAttracting and developing Saudi technical talent within operating teams, in support of localisation targets for the facility management sector
٠٧ — القطاعات

Management shaped by each sector's needs

٠٨ — رؤى

Insight for better decisions

All articles
٠٩ — معايير التنفيذ

Documented work, clear results

Maintenance work is not complete once it is carried out; it also needs documentation that shows the condition of systems, the work completed and the issues that require follow-up

01Documented technical readingsInspection results and pressure, temperature and consumption readings recorded for each system instead of estimates, to assess its condition and track its performance
02Clear reports for managementEvery technical intervention documented with photographs and submitted to facility management with observations, recommendations and any items that require its approval
03Complete follow-up of worksFrom plant and pump rooms to rooftop equipment, under a single operating plan with defined responsibilities

Let us understand your facility's needs

Whether you are looking for integrated facility management or specialised operation and maintenance services, we will discuss your facility's needs with you and define the right scope of work

Request a technical assessment