Home/Interactive tools
رؤى سهل — أدوات تفاعلية

Tools to gauge the state of your facility

Free tools that give you an initial view of operational readiness and help you diagnose common HVAC faults and review your maintenance contract before any conversation with us

الأدوات
01Operational readiness assessment
02HVAC fault diagnoser
03Maintenance contract review
الأداة ٠١ · تقييم الجاهزية

How far is your facility from managed operation?

Eight questions on how your HVAC is managed today, after which you receive your operational maturity level and a ranked list of improvement priorities

السؤال ١ من ٨
٠١ · سجل الأصول

Do you keep an up-to-date register of HVAC equipment and building systems?

٠٢ · الصيانة الوقائية

How are your HVAC systems maintained today?

٠٤ · العقد

Does the maintenance contract define response and resolution times?

٠٥ · التقارير

What does management receive from the service provider?

٠٦ · جاهزية الصيف

Are systems inspected before the summer peak?

٠٧ · الطاقة

Do you track the electricity consumption of your HVAC systems?

٠٨ · قرارات الاستبدال

How are equipment replacement decisions made?

مستوى نضج التشغيل
—
Answer the questionsThe result updates with each answer.
Reactive
Basic
Structured
Data-driven
أولويات التحسين
  1. Shown once the questions are complete.

An indicative self-assessment that does not replace a technical visit

الأداة ٠٢ · مشخّص الأعطال

What is happening with your HVAC system?

Select the symptom closest to what you are seeing to view the likely causes and what you can safely do before a technician arrives

Poor cooling

خلال أيام
Likely causes
  • Clogged air filters restricting airflow
  • Dirty condenser or evaporator coils
  • Low refrigerant charge, usually caused by a leak
  • Weak compressor or fan performance
What you can do now
  • Check that the thermostat is set to cooling mode at a suitable temperature
  • Inspect the filter and clean it if it can be reached safely
  • Make sure the outdoor unit is not obstructed by objects or dust
When do you need a technician?Within days, and immediately if the area is critical, such as server rooms or sensitive storage.

Water leaking from the unit

عاجل
Likely causes
  • Blocked condensate drain line
  • Overflowing or cracked drain pan
  • Coil freezing due to poor airflow, then thawing
  • Unit installed out of level
What you can do now
  • Switch the unit off if water is near electrics or false ceilings
  • Place a container to collect the water and move equipment and documents away
  • Check the filter; a blockage is a common cause of coil freezing
When do you need a technician?Urgent; a water leak can damage ceilings, finishes and fittings within hours.

Unusual noise or vibration

خلال أيام
Likely causes
  • Loose panels or screws
  • Worn fan bearings or belt
  • A foreign object inside the fan
  • A problem with the compressor or its mounting bases
What you can do now
  • Switch the unit off immediately if the noise is a sharp metallic sound or repeated clicking
  • Note when the noise occurs and what it sounds like; this shortens diagnosis time
When do you need a technician?Within days, and immediately if the noise is metallic; ignoring it can turn a minor fault into compressor damage.

Abnormal odour

حسب الرائحة
Likely causes
  • Musty smell: bacterial growth in the drain pan or on the coil
  • Dusty or damp smell: dirty filters
  • Burning smell: an electrical problem or an overheating motor
What you can do now
  • Burning smell: switch the unit off immediately and isolate it at the circuit breaker
  • Musty smell: check the filter and avoid spraying air fresheners into the unit
When do you need a technician?Immediately for a burning smell, and within days for a musty smell, as it affects indoor air quality.

Unit keeps switching on and off

خلال أيام
Likely causes
  • Unit capacity not matched to the size of the space
  • Thermostat sensor in an unsuitable location
  • Poor airflow or dirty coils
  • A pressure or electrical protection problem
What you can do now
  • Make sure the thermostat is away from direct sunlight and air outlets
  • Check the filter and that the air vents are clean
When do you need a technician?Within days; short cycling strains the compressor, raises consumption and shortens the life of the unit.

High electricity bill

ضمن الزيارة الدورية
Likely causes
  • Dirty coils and filters increase running time
  • Low temperature settings or operation outside working hours
  • Conditioned air escaping through doors and windows
  • Old, low-efficiency units
What you can do now
  • Review temperature settings and out-of-hours operating schedules
  • Make sure doors and windows in air-conditioned areas are kept closed
When do you need a technician?During the scheduled visit, with consumption metering to identify the highest-consuming systems.

General guidance that does not replace a technical inspection. Do not open electrical panels or unit covers yourself

الأداة ٠٣ · مراجعة العقد

Does your current maintenance contract protect you?

10 essential clauses in any maintenance contract. Tick the ones your contract includes to reveal the gaps worth negotiating

Let us understand your facility's needs

Whether you are looking for integrated facility management or specialised operation and maintenance services, we will discuss your facility's needs with you and define the right scope of work

Request a technical assessment